Skip to Main Content
Car Keys

Key Fob Replacement in Texas: Which Fob You Have, What It Costs and What to Bring

By Dean Lavi, Owner of WOW Locks 9 min read
Comic-style illustration of three car keys side by side: a button remote, a remote head key with blade and a smart fob
Verified #B10595301 Licensed, with published flat rates.

A key fob replacement on the WOW Locks rate card is the $120 car key replacement base fee plus the line for your fob: $60 for a remote only, $70 for a keyless entry remote, $100 for a remote head key, or $100 to $300 for a push-to-start fob depending on the make and model. Tax is additional. Call (844) 969-5625 and have your make, model and year ready.

The rest of this page is how to tell which fob you hold, what to bring, and what to do if the fob is gone while you are far from home. Start with the fob in your hand, because the type sets the line you pay.

Which Key Fob Is in Your Hand? Three Types You Can Tell Apart by Looking

Look at the fob. A small plastic remote with buttons and no key blade is a remote only or keyless entry remote. A remote with a metal key blade folded or fixed into it is a remote head key. A fob you never insert, with a hidden blade inside, is a push-to-start fob. These are the three families on our rate card.

The grouping below is how we sort jobs, not an industry standard. Most fobs fit one row at a glance. If yours does not, send us the make, model and year and we sort it out on the call. Our car key replacement service page covers the whole job. Every line in the table sits on top of the $120 base fee.

What you see What it usually is Rate card line
Buttons only, no blade Remote only, or a keyless entry remote Remote only $60 (programming included). Keyless entry remote $70 (new programmable remote)
Buttons plus a metal blade Remote head key $100 (combined remote and key)
No slot, the car starts with a button Push-to-start fob $100 to $300 (range varies by make and model)
A blade with no buttons Not a fob, but it can be replaced on the same call Mechanical key $60 (cut and shaped on site). Transponder key $60 (chip cut and programmed)

What Is Inside a Fob? The Radio, the Chip and the Emergency Blade

A fob does two separate jobs. The radio sends lock and unlock commands when you press a button. The chip inside is what the car reads to allow the engine to start, and a hidden metal blade can open the driver door on many cars if the battery dies. Cutting a blade and programming a fob are different steps, which is why they can show up as separate lines on a quote.

Comic-style illustration of a smart key fob with its metal emergency blade slid partly out, with speed lines

The buttons and the chip are not the same part. A fob can lock your doors and still not start the car.

That split is why a replacement is more than buying a case. Many vehicles carry an immobilizer, and the federal rule on vehicle immobilizers describes it as technology that can prevent a vehicle from starting unless a verified code is received by the transponder. A new fob has to be taught to the car, or the buttons might work while the engine stays quiet.

Cutting is the metal side. Programming is the electronic side. On our rate card a mechanical key reads “cut and shaped on site,” a transponder key reads “chip cut and programmed,” and a remote only reads “programming included.” If your fob still works but acts up, the battery and reprogramming checks are in our guide to a key fob that is not working.

What Does a Key Fob Replacement Cost in Texas, Fob by Fob?

On the WOW Locks rate card the charge depends on the fob type. Remote only is $60 with programming included, a keyless entry remote is $70, a remote head key is $100 and a push-to-start fob is $100 to $300. The $120 car key replacement base fee applies on top of the key-type line, and tax is additional. Fob battery swaps and fobs you bring us are quoted on the call.

Fob type Rate card line What the line covers What changes it
Remote only $60 Programming included Add-ons below, only when they apply
Keyless entry remote $70 New programmable remote Newer model add-on of $60 may apply to programming
Remote head key $100 Combined remote and key Same add-ons
Push-to-start fob $100 to $300 Range varies by make and model Same add-ons

Add-ons on top, only when they apply:

  • VIN run, $40: only when it is required to source the key.
  • Newer model vehicle, $60: late-model cars needing updated programming.
  • Sport or luxury vehicle, $60: specialty programming for premium makes. Both $60 charges are programming charges, never a lockout charge.
  • Additional keys, after-hours calls and extra distance: quoted on the call before anyone is sent to you.

Here is one example, not a quote: the $120 base fee plus the $60 remote only line comes to $180 before tax and add-ons. For a push-to-start fob we do not print a total, because the line is a range. You get the $100 to $300 line plus the base fee, confirmed on the call.

The full Austin table, with every key type, is in our car key price table for Austin. Everything we post lives on our published rate card.

Why Do Push-to-Start Fobs Cost $100 to $300?

Push-to-start fobs vary more than any other type. The same fob family can be one price on one make and a different price on another, so the rate card carries a range for that line, $100 to $300 on top of the $120 base fee, instead of a single number. We give you the exact figure on the call once we have your make, model and year, before anyone is sent out.

We will not invent a reason for the range. The card says it varies by make and model, and that is the honest answer. What we can say is that a newer or sport or luxury vehicle can carry a $60 programming add-on each, and that those add-ons are listed up front, not sprung later.

Give us make, model, year and any working key you still have. That is what turns $100 to $300 into one number.

A working key matters because it can change what the car needs. If you hold one, say so. If you hold none, say that too. Either answer is fine, and neither one changes how plainly we quote. If you want the whole job described, see our page on push-to-start fob replacement and how a technician works where the car is parked.

What Do You Bring to Get a Fob Made? VIN, Registration or Title, and Photo ID

Our technicians ask for three things before making a key: the vehicle itself, proof that the car is yours, and the VIN. Proof of ownership means your photo ID plus your registration or title. This is our own process to protect owners, not a rule we are citing. The VIN is at the driver side windshield corner and on the door jamb.

Comic-style illustration of a hand holding a blank paper and a blank card beside a car windshield corner

Bring Why we ask Where to find it
The vehicle We program it on site, where it is parked Wherever you are
Photo ID Shows you are the person on the paper Your wallet
Registration or title Links you to the car Glove box, a file at home or your phone
The VIN Identifies the exact key and chip the car needs Dash corner, driver door jamb sticker, title or insurance card

Typically the VIN is the one people have to hunt for. The state explains where to find your VIN: stand outside the car and look at the corner where the dashboard meets the windshield on the driver side. It also appears on a sticker in the driver door or jamb, and on your title and insurance card. If a VIN run is needed to source the key, that is the $40 line.

If the title itself is lost, Texas lets owners request a certified copy of a Texas title. Start that with the state. Your registration may be enough for us, and we tell you on the call.

Replace, Reprogram or Add a Spare? Pick the Call That Fits

Replace when the fob is lost, cracked or dead beyond a battery change. Reprogram when the fob is fine and the car simply stopped answering it. Add a spare when you still have a working key. A spare is the easiest moment to solve the problem, because everything is still in your hand.

  • Replace: the fob is gone, broken or past saving.
  • Reprogram: the fob looks fine but the car no longer responds to it.
  • Add a spare: you have a working key today and want a second one before you need it.

Do not wait until the last fob is gone. One working key makes the job simpler for you and for us. If you are weighing a second fob, our guide on how to copy, clone or program a spare key covers the three ways to make one. Programming a fob you bought elsewhere is quoted on the call.

Lost Your Only Fob Away From Home? What to Do Before You Drive Off

Stop and check before you go anywhere: pockets, the last stop, any app or tracker on the ring. If the fob is truly gone, tell us your make, model, year and city, and whether you have any working key. We serve Austin, Houston, DFW and San Antonio under one statewide rate card, and the quote comes on the call.

  1. Retrace your steps, and check any phone tracker tied to the key ring.
  2. Look for a spare at home or with family.
  3. Find the VIN on the dash corner or your insurance card.
  4. Call (844) 969-5625 with make, model, year, city and any working key.
  5. Hear the rate, add-ons included, and confirm before anyone sets out.

With holiday trips, valet handoffs and borrowed or rental cars about to fill the roads, a plan beats a scramble. The steps for a total loss are in the all-keys-lost steps, and the same statewide rate card applies outside Austin, as the Dallas-Fort Worth lockout post shows. A lockout is a separate charge from programming.

We have local technicians in every market we serve, including Austin, Houston, Dallas and San Antonio. Call, or use the request service form, and get the number before the plan changes.

WOW Locks was founded in 2021, and our technicians have 17+ years of locksmith experience. WOW Locks LLC is insured and bonded and holds Texas DPS (TOPS) license B10595301. Texas regulates locksmith companies under Texas Occupations Code Chapter 1702, and you can check any company’s license on the state’s TOPS portal before you book.

Frequently Asked Questions

Is a remote only fob different from a remote head key?

Yes. A remote only has buttons and no blade, a $60 line with programming included. A remote head key joins the remote and the key blade in one piece, a $100 line on our rate card. Each line sits on top of the $120 base fee. Tell us what you hold and we confirm the line on the call.

Why is a push-to-start fob a range instead of one price?

The cost varies by make and model, so our rate card lists $100 to $300 for that type, on top of the $120 base fee. Newer and sport or luxury vehicles can add a $60 programming charge each. We give you one exact figure on the call before anyone is sent to you.

Is cutting the key blade a separate step from programming the fob?

Yes. Cutting shapes the metal blade. Programming teaches the car to accept the remote and chip. On our rate card a mechanical key is cut and shaped on site, a transponder key is chip cut and programmed, and a remote only includes programming.

Do you make a new fob where my car is parked?

Yes, our technicians work where the car is, which is why we ask for make, model, year and your city on the call. The quote comes first, and after-hours and distance are quoted on the call before a technician is sent.

Does the same rate card apply in Houston, Dallas and San Antonio?

One rate card applies statewide, with local technicians in every market we serve. The $120 base fee and the fob lines are the same in each city. Extra keys, after-hours calls and distance are quoted on the call before anyone is sent, and tax is additional.

Keep going

Where to Next?

13 more places to dig in: deeper guides, the services behind this one, and the city pages it covers.

Need Help Now?

Published flat rates. Add-ons quoted on the call. Insured and bonded.

(844) WOW-LOCK